Lightweight And Versatile MMA Inverter Welder
Weighing 9.8kg, the HYMMA-200P is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYMMA-200P extremely cost effective and aimed at the semi professional user.
The HYMMA-200P MMA welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMMA-200P can be regulated within the range of 10-200 Ampere making the HYMMA-200P adjustable to suit welding different materials and thicknesses of steel.
Infomation On Duty Cycle
Beware of lower quality models by always checking the ‘Duty Cycle’. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 200A welder has a duty cycle of 60% when used on 200A output. This means it can be used for three and a half minutes in every 10 minute period.
Duty cycles for the Hyundai welder range shown below:
Model Output Amperage / Duty Cycle / Period of use within 10 minute period
MMA120 70A / 100% / 10minutes 90A / 50% / 6minutes 120A / 35% / 3.5minutes
MMA160 95A / 100% / 10minutes 120A / 50% / 6minutes 160A / 35% / 3.5minutes
MMA200P 155A / 100% / 10minutes 200A / 60% / 6minutes
TIG200 155A / 100% / 10minutes 200A / 60% / 6minutes
Mig180 105A / 100% / 10minutes 140A / 60% / 6minutes 180A / 35% / 3.5minutes
Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. Always check the duty cycle to ensure you are getting the best value for money.
The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. This makes them more cost effective not only to purchase, but also to run.
Thermal Overload Protection
Fitted with thermal overload protection to ensure maximum durability. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
Versitile Inverter Welder
Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-200P is a good all rounder for welding with rods up to 5mm. The HYMMA-200P features high frequency starts allowing for smooth arc strikes.
Low Service And Maintenance
With low service and maintenance requirements, the HYMMA-200P is incredibly easy to use and maintain, and has full Hyundai UK parts back up.
In The Box
- Electrode holder with 2m cable
- Earth clamp with 1.5m cable
- Chipping hammer
- Wire brush
Know your welder
(MMA) Manual Metal Arc – Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
(TIG) Tungsten Inert Gas – Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.
(MIG) Metal Inert Gas – Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
Covered by a Hyundai 3 year platinum warranty.
|Current @ 60% (A)||155|
|Dimensions (H x W x L) (mm)||460 x 255 x 255|
|Duty Cycle (%) Under 40ºC||60% @ 200A|
|Input Voltage (V)||230|
|Net Weight (kg)||9.8|
|No-Load Voltage (V)||76|
|Power Factor (Cosφ)||0.7|
|Rated Output Range (Amps)||10 – 200|
|Usable Electrode (mm)||1.0 – 5.0|